| 제품소개 |
|
|
|
|
 |
|
|
|
| |
|
 |
|
|
PT/악세사리
본문
 |
● Extend a PoE connection beyond the 100m limit
● IEEE 802.3af and IEEE 802.3at compliance
● Ease of installation with no additional power supply
● Compatible with all Axis network video products
● Indoor use |
|
| |
Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used.
To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.). |
| |
| Compatibility |
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE, and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections with Axis network video products.
 |
| |
| Range |
Range depends on the power required, so a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129 at 100 m (328 ft.) intervals. Check in the Range tab for information about Maximum distances.
 |
| |
| No additional power supply |
| AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained. |
| |
| 카다로그 |
 AXIS T8129 PoE Extender |
| |
| 사용자 매뉴얼 |
| AXIS T8129 poE Extender - Installation Guide |
| |
| 치수 |
 |
| |
|
|
| |
|
